FEATURES
-
Angle Ventilation
The double slider ventilation system, which opens wide from the neck to the sides, inherits the angle of the TB JACKET, effectively cooling the entire body by cooling the underarms while also being easy to put on and take off. -
Ensuring range of motion
Minimal cutting ensures an ideal fit and range of motion, with maximum shoulder mobility for ice climbing. -
Hood Construction
The hood is designed for use with a helmet. Eyelets on the front allow for easy adjustment both vertically and horizontally, and can be fastened or released with a single action. There is also a Velcro adjuster on the top of the hood. -
pocket
It has a large-capacity pocket on the abdomen and an inner zippered pocket on the left chest area, which is convenient for storing valuables and small items. -
Hem stopper
The drawcord stopper at the hem is located at the center front, not the side, to avoid interference with gear set in the gear loops when wearing a harness. -
25-26FW Update
The hem and hood cuffs are aligned with the outer fabric and are bonded instead of sewn, simplifying the look and eliminating surface stitching for improved durability. -
Cuff specifications
The cuff has a wide opening that allows you to put your sleeve through the glove regardless of its volume. The wide adjuster attachment point ensures a consistent fit. -
Outer fabric
The outer fabric is 50-denier stretch nylon, offering an excellent balance of lightness and durability. The shoulders and waist, areas that are prone to stress from friction with the backpack, are reinforced with the same material as the TB JACKET. Both are treated with a water-repellent finish that also boasts the highest level of oil repellency currently available. -
"Täsmä" fabric logo (3 layers)
The vertical lines represent breathability, while the horizontal lines represent the multi-layer structure. This logo is used on TETON BROS.'s unique waterproof and breathable material, "Täsmä," which combines high breathability and waterproofness.
Tasm
This next-generation waterproof and breathable material was developed in collaboration with Toray. It features an electrospun ESP membrane, which sprays multiple layers of microscopic polyurethane fibers. The multiple layers of microscopic mesh block moisture while allowing physical ventilation. This makes it "breathable" rather than "breathable." Another distinctive feature is its soft feel, which is hard to believe for a waterproof and breathable material. The outer fabric is made of high-strength nylon, combining durability and lightness. Mechanical stretch provides ample flexibility despite being 100% nylon. The lining is made of a moisture-wicking, quick-drying 20-denier knit backer, combining a supple texture with high functionality, resulting in a well-balanced material with high waterproofness and breathability.
If you wash it yourself, please use a neutral detergent. Never use fabric softener or bleach. When washing, always wash by hand and gently press the garment. Do not use the hand wash cycle on a washing machine.
After washing, rinse thoroughly to remove any remaining detergent. If detergent remains, the water-repellent properties will be reduced. (Surfactants are substances that bind water and oil, so if detergent remains on the fabric, it will significantly reduce the water-repellent properties of the fabric surface.)
The same applies if the surface fabric is clogged with tiny particles of dirt, and particles remaining in the gaps in the fabric often cause a decrease in water repellency and water to seep in. After rinsing, dry in the shade and iron when half-dry, but do so at a low temperature and take care not to unravel the fabric. Do not use a dryer.