FEATURES
-
High waist
The medium-high waist with a high back eliminates interference with the hip belt of a backpack. The Velcro adjusters on both sides allow for fine adjustment of the waist size. -
Ventilation and pockets
The outside of the thighs are equipped with wide-open ventilation, and ample pockets are provided in case you don't need a jacket during spring touring. -
Thigh pocket
There is a loop inside the right pocket, the end of which is sewn directly into the pants body and reinforced with darts for maximum strength. -
裾
The zipper and snap buttons allow you to adjust the leg width to three positions. The widest position is the same width as the TB PANT, and is compatible with everything from hiking boots to ski/snowboard boots. -
"Täsmä" fabric logo (3 layers)
The vertical lines represent breathability, while the horizontal lines represent the multi-layer structure. This logo is used on TETON BROS.'s unique waterproof and breathable material, "Täsmä," which combines high breathability and waterproofness.
Tasm
This next-generation waterproof and breathable material was developed in collaboration with Toray. It features an electrospun ESP membrane, which sprays multiple layers of microscopic polyurethane fibers. The multiple layers of microscopic mesh block moisture while allowing physical ventilation. This makes it "breathable" rather than "breathable." Another distinctive feature is its soft feel, which is hard to believe for a waterproof and breathable material. The outer fabric is made of high-strength nylon, combining durability and lightness. Mechanical stretch provides ample flexibility despite being 100% nylon. The lining is made of a moisture-wicking, quick-drying 20-denier knit backer, combining a supple texture with high functionality, resulting in a well-balanced material with high waterproofness and breathability.
If you wash it yourself, please use a neutral detergent. Never use fabric softener or bleach. When washing, always wash by hand and gently press the garment. Do not use the hand wash cycle on a washing machine.
After washing, rinse thoroughly to remove any remaining detergent. If detergent remains, the water-repellent properties will be reduced. (Surfactants are substances that bind water and oil, so if detergent remains on the fabric, it will significantly reduce the water-repellent properties of the fabric surface.)
The same applies if the surface fabric is clogged with tiny particles of dirt, and particles remaining in the gaps in the fabric often cause a decrease in water repellency and water to seep in. After rinsing, dry in the shade and iron when half-dry, but do so at a low temperature and take care not to unravel the fabric. Do not use a dryer.